Getac S410 Series User Manual

54
Changing or Replacing
Changing the Component in the Multi-
Purpose Bay
If you have a user-removable component in the multi-purpose bay, you can
purchase a different one and change the component as needed.
1. Turn off the computer and disconnect the AC adapter.
Skip this step if you are removing the battery pack in the multi-purpose
bay for the purpose of hot swapping.
2. Carefully place the computer upside down.
3. If removing the optical disc drive, unfasten the screw that secures the
drive.
4. Slide the security latch to the unlocked position ( ) (

) and hold it
there. Meanwhile, grasp the edge of the existing component using the
other hand and pull it out of the bay (

)
.

Getac S410 Series Specifications

General

Processor	Intel Core i5/i7
Graphics	Intel UHD Graphics
Display	14" FHD (1920 x 1080) LCD
RAM	Up to 32GB DDR4
Storage	Up to 1TB PCIe NVMe SSD
Operating System	Windows 10 Pro
Weight	2.2 kg
Rugged Features	MIL-STD-810H certified IP53 certified
Wireless	Wi-Fi 6, Bluetooth 5.0
Ports	HDMI
Security	TPM 2.0, Smart Card Reader
Battery	Removable Li-Ion