Getting Started 1-7
Attaching the Hand Strap
The hand strap can be attached to any two sides of the four (option)
corners of your computer.
Standard setup: two buckles on the left/right front side of your computer.
To release, press on the right spring latch first to detach the right side.
Then release the left side.
Optional setup: buckles on four corners of your computer.
CAUTION:
z The strap has been designed to carry only the weight of the computer. Therefore,
be sure that the strap does not carry a weight that exceeds the weight of the
computer. The strap may accidentally come loose from the computer.
z Do not use a strap that is damaged or about to tear.
To Next Page
Loading...
Need help?
General
