Getac V100 Operation Manual

Managing Power 3-4
Battery Automatic Calibration Utility
NOTE: To use the Battery Automatic Calibration Utility, the Battery Calibration driver
supplied with your computer must be installed.
After installing the Battery Pack Automatic Calibration Utility, the
Battery Monitor will call up the Battery Learning program every
month. Before running Battery Monitor, it will check if the battery
temperature is between 10
o
C and 39
o
C. When it is between 10
o
C and
39
o
C, the following screen appears.
Click Yes to run the Battery Learning program’s recalibration function
to fully charge the battery pack, discharge it completely, then fully charge
it again.
Click No if you do not wish to run the Battery Learning program’s
recalibration function now.
Click Cancel if you do not wish the Battery Monitor to call up the
Battery Learning program every month to run the Battery Learning
program’s recalibration function.

Getac V100 Specifications

General

Brand	Getac
Model	V100
Category	Laptop
Language	English