8
CAUTION:
When closing the cover, you must firmly press all
over the cover to ensure its sealing capability. And
keep the screw tightened to protect against external
impacts.
To ensure IP67 protection performance, always
have the cover closed with the screw tightened
unless you need to open it for inserting or
removing a card.
Connecting to AC Power and Charging the
Battery
NOTE:
The battery is shipped to you in power saving mode that protects it from
charging/discharging. It will get out of the mode to be ready for use when
you connect AC power to the device for the very first time.
Charging will not start if the battery’s temperature is outside the allowed
range, which is between 0 °C (32 °F) and 50 °C (122 °F). Once the battery’s
temperature meets the requirements, charging automatically resumes.
1. Plug the DC cord of the AC adapter to the power connector of the
device (
).
Plug the female end of the AC power cord to the AC adapter and the
male end to an electrical outlet (
).
To Next Page
Loading...
Need help?
General
