4
Top Components
Ref
Component Description
Barcode scanner
lens (optional)
Scans barcodes.
Power button
Short
press
Goes into or wakes up from sleep mode.
Long
press
Starts up the device from the power off
state.
Opens a menu with Power off option
when the device power is on.
A press longer than 8 seconds brings
different results. (See “Restart or Hard
Reboot” in Chapter 6 for information.)
Minus button
Decreases the sound volume (default setting). The
type of sound adjusted depends on the current
operation.
Plus button
Increases the sound volume (default setting). The
type of sound adjusted depends on the current
operation.
Fn (Function)
button
Depending on your model, the default function is
one of the below.
Trigger
Functions as the trigger button for the
barcode scanner.
Shutter
Functions as the shutter button for the
camera.
NOTE: The hardware buttons (except the power button) can be re-defined using
Getac Settings.
To Next Page
Loading...
Need help?
General
