20
Using a MicroSD Card
Inserting a MicroSD Card
1. Loosen the screw and flip open the cover.
2. Insert the card into the slot, with the golden contacts pointing to the
slot and facing rear.
3. Close the cover and tighten the screw.
CAUTION:
When closing the cover, you must firmly press all
over the cover to ensure its sealing capability. And
keep the screw tightened to protect against external
impacts.
To ensure IP67 protection performance, always
have the cover closed with the screw tightened
unless you need to open it for inserting or
removing a card.
To Next Page
Loading...
