17
Chapter 3
Getting Connected
This chapter tells you how you can get your device connected through a
variety of ways.
Wireless Connections
Using WWAN (Select Models Only)
NOTE: Your model only supports data transmission. Voice transmission is not
supported.
Select models support LTE and UMTS connectivity.
Mobile network is enabled by default. The icons in the status bar indicate
which kind of data network you’re connected to and the network signal
strength.
To check or modify settings, go to Settings Network & internet Mobile
network.
To check the specific WWAN module information, go to Getac Settings and
check the items under LTE.
Using Wi-Fi Networks
Turning On/Off the Wi-Fi Radio
Open Quick Settings and tap the Wi-Fi icon.
When the Wi-Fi radio is turned on, the icon appears in the status bar. If
your device finds a network that you connected to previously, it connects to it.
To Next Page
Loading...
Need help?
General
