Getac ZX70 Series User Manual

48
Chapter 6
Care and Maintenance
This chapter provides various care and maintenance information.
Restart or Hard Reboot
Restart
To restart the device, press and hold the power button until a menu pops
up. Then tap Restart.
If the device somehow cannot display the power off menu, you can force
the device to power off by pressing and holding the power button for more
than 8 seconds. Then start up the device by pressing and holding the power
button for at least 3 seconds.
Hard Reboot
In case the device is completely unresponsive, you can perform a hard reboot
to solve the problem. Use one of the following methods.
 Press and hold the power button for at least 12 seconds until the Battery
Charge indicator blinks red three times. Then release the power button.
The device will power off. Start up the device by pressing and holding
the power button for at least 3 seconds.
 If the above method does not work, press and hold the power button
for at least 16 seconds. During this period, the Battery Charge indicator
will blink red three times and then the Power indicator will light up,
meaning the device is starting up.
NOTE: Hard reboot can be performed when the power is either on or off.

Getac ZX70 Series Specifications

General

Brand	Getac
Model	ZX70 Series
Category	Tablet
Language	English