9
2. The charge indicator glows in amber when charging is in progress. Do
not disconnect your device from AC power until the battery is fully
charged, as indicated by the amber indicator turning into green. This
will take a couple of hours.
Performing the Initial Startup
NOTE: You must use AC power when starting up the device for the very first time.
When turning on your device for the very first time, you will be guided
through a setup process.
1. Make sure that your device is connected to AC power.
2. To turn on the device, press and hold the power button for at least 3
seconds until the Power indicator lights up.
The device powers up and displays the initial screen.
3. Follow the on-screen instructions to complete the initial setup process.
After the setup is completed, the Home screen appears. You can now
use your device.
To Next Page
Loading...
Need help?
General
