Getinge Maquet PowerLED II Maintenance Manual

Inspections
Mechanical inspections
6
Maquet PowerLEDII
01810 EN 03
31 / 56
Fig.36: Suspension arm
• Check the presence of the tube suspension’s linking screws and the replacement periodicity.
(Do not re-tighten these screws during maintenance as there is a risk of fracture. If screws
appear loosened, replace them)
• Check that the adjustment of the brake screws has been performed.
• Check the presence of the safety rings with holding screw.
• Check the presence of the bumpers and caps.
• Check the presence of the discs inside the caps of shafts2 and 3 SATX.
Fig.37: Checking the XO cap
• Check that the XO cap, if present, is
fastened securely.

Getinge Maquet PowerLED II Specifications

General

Brand	Getinge
Model	Maquet PowerLED II
Category	Medical Equipment
Language	English