Gigaset easy E295 - Local Answer Machine (if Available); Setting up the Answer Machine

Gigaset easy E295-E295A / LUG-Kombi US en / A31008-M2901-R351-1-3S19 / answering_A.fm / 2/8/22
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Local answer machine (if available)
25
Local answer machine (if available)
The handset is used to personalise settings on and operate the answering machine.
Setting up the answer machine
The default setting is answer machine already set up. You can change this.
Recording your own announcements
You can record your own announcements using the handset. The pre-recorded announcement
is used if no personal announcement is available.
 Menu Answering Machine OK Announcements OK Rec
announce
OK Speak after OK OK . . . You hear the ready tone (short tone) Record
the announcement (min. 3 seconds)
Confirm with OK
Cancelling and discarding an announcement:
Press or
After the recording, the announcement is played back for you to check.
Recording ends automatically when the max. recording time of 170 seconds is reached or there
is
a pause in speaking of longer than 2 seconds.
Play back the announcement:
 Menu Answering Machine OK Announcements OK Play
announce
OK
Delete announcement:
 Menu Answering Machine OK Announcements OK Del
announce
OK
Changing settings
 Menu Answering Machine OK Select the setting you want to change
Time to Auto Answer
 Ring Delay OK Immediately / 10 sec / 18 sec / 30 sec / Auto OK ( = enabled)
Auto: the answer machine answers a call:
• after 18 seconds if there are no new messages.
• after 10 seconds if there are new messages.
Recording time
 Message Length OK Maximum / 1 Minute / 2 Minutes / 3 Minutes OK
( = enabled)
Select Auto when you want to retrieve messages while you are out. So for remote
access ( p. 28), it is clear after 10 seconds that there are no new messages. No call
costs are incurred if the call is ended immediately.