Gigaset easy E295 - Eco Dect

Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Additional functions
Gigaset easy E295-E295A / LUG-Kombi US en / A31008-M2901-R351-1-3S19 / applications_alhena.fm / 2/8/22
32
Deactivate baby monitor / Cancel alarm
Deactivate the baby monitor remotely
 Accept alarm call Press keys
The baby monitor is deactivated and the handset is in idle status. The baby monitor settings
on the handset (e.g. no ringtone) will remain activated until you press the display key Off.
ECO DECT
The device range is set to maximum by default. This guarantees the best connection between
handset and base. In idle mode, the handset does not transmit (it is radiation-free). Only the base
maintains contact with the handset, using weak wireless signals. During a call, the transmit
power automatically adapts to the distance between base and handset. The shorter the distance
to the base, the lower the radiation.
Reducing radiation by up to 80%
Enabling/disabling the maximum range:
Deactivate the baby monitor:
 In idle status press the display key Off
Cancel the alarm:
 Press the End call key during an alarm
The alarm is forwarded to an external destination number.
The receiving phone supports tone dialling.
The baby monitor cannot be reactivated remotely.
Reactivate: p. 31
 Menu Settings System OK ECO DECT OK Max. Range OK
(
= range and radiation reduced)
It is not possible to use a repeater to increase the range.