Gigaset easy E295 - System

Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Phone settings
Gigaset easy E295-E295A / LUG-Kombi US en / A31008-M2901-R351-1-3S19 / settings.fm / 2/8/22
42
Permit/block VIP calls
Specify whether, when time control is enabled, calls from those marked as VIP contacts in the
directory are also suppressed.
 Menu Call Manager OK Time Control OK Suppress VIP Calls OK
( = enabled)
Off for anonymous calls
You can set your handset so that it does not ring for calls where Calling Line Identification
has been withheld. The call is only signalled on
the display.
 Menu Call Manager OK Mute Anonym. Calls OK ( = enabled)
System
Changing the system PIN
 Menu Settings OK System OK System PIN OK Enter the
current 4-digit system PIN (default: 0000) OK Enter the new 4-digit system PIN OK
Resetting the system PIN: p. 42
Resetting the handset
You can reset individual settings. Entries in the directory and call list, and the handset’s registra-
tion to the base, are maintained.
 Menu Settings OK System OK Reset Handset OK . . . Perform
factory reset? OK
Resetting the base
The time and date are not affected. The answer machine (if available) is not ready until after
about 15 seconds after the base is reset.
Resetting the base from the menu
The handsets remain registered. The system PIN is not reset.
 Menu Settings OK System OK Reset Base OK . . . Reset? OK
Resetting the base using a key on the base
All handsets are de-registered. The system PIN is set back to the original code 0000.
 Remove the power cable from the base Keep pressed the Registration/paging key on the
base At the same time, reconnect the power cable to the base Keep the key pressed
for at least another 5 seconds
A reset disables mode No radiation, resets individual settings and deletes all lists.