Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Extending the functionality of the phone
Gigaset easy E295-E295A / LUG-Kombi US en / A31008-M2901-R351-1-3S19 / extending.fm / 2/8/22
34
Extending the functionality of the phone
Multiple handsets
Up to four handsets can be registered with the base.
Every device is assigned an internal name and internal number (INT 1 – INT 4). The assignment
ca
n be changed.
All internal numbers are already assigned: De
-register any devices no longer needed
Registering a handset
The Please register handset display flashes or you want to register the handset with a different
base.
Registering from the display key or menu
On the handset
Press the display key Registr.
or
On the base
Within 60 seconds, press and hold the registration/paging key for a minimum of 3 seconds.
Registration must be initiated both on the base and on the handset. Both must be
within 60 seconds.
Menu Settings OK Registration OK . . . The display shows Registering...
Enter as required the system PIN of the base (default: 0000) OK
The registration process takes about 1 minute. Handsets are assigned the lowest avail-
able internal number (1 to 4). If internal numbers 1 to 4 are already assigned to other
devices, number 4 is overwritten.
Some Gigaset bases and bases/routers from third party manufacturers might not be
fully compatible with the handset and not all functions are displayed correctly. In
such cases, use menu entry Legacy (GAP) Registration. This guarantees correct dis-
plays on the handset, but can entail restrictions for some functions.
To Next Page
Loading...
