EasyManua.ls Logo

Gigaset SL910 - Updating the Base Firmware; Connecting Base to Router;Internet; Connecting Base to Local Network (Router)

Gigaset SL910
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
82
Updating the base firmware
Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / settings-pabx.fm / 23.08.2011
Version 4.1, 21.11.2007
u Static assignment: You assign the phone a fixed IP address.
¤ In the Settings menu (¢ page 24),
touch [
Ê System ].
¤ Touch the ’ next to Local Network.
¤Select IP Address Type Static/
Dynamic.
In the case of IP Address Type Dynamic,
the fields show the settings accepted by
the router. You cannot change them.
In the case of IP Address Type Static, you
must specify the following information in
the following fields:
IP Address
The phone's IP address. This consists of
four parts (decimal figures between 0
and 255), separated by a full stop. The
first three parts must correspond to the
private IP address of the router.
Subnet Mask
The subnet mask to be assigned to the telephone (overwriting the current set-
tings). The default setting is 255.255.255.0.
Default Gateway
The IP address for the default gateway, through which the local network is con-
nected to the Internet. This is generally the local IP address of your router.
192.168.2.1 is the default.
Preferred DNS server
The IP address for the DNS server (Domain Name System), that converts the cor-
responding symbolic names into public IP addresses. You can specify your
router's IP address here. 192.168.2.1 is the default.
Enter the IP addresses/subnet mask:
¤ Touch the ’ next to the IP address/
subnet mask.
¤ Enter the IP address in the 4 fields at
the top of the display.
– If the fields are empty, the cursor is
in the left field. Once you have
entered three digits, the cursor
automatically moves to the next
field.
– If less than three digits are entered,
touch the next field to input the fol-
lowing part of the address.
– If a field is already full, touch the
field, delete the digits, enter that
part of the address. Leading zeros must not be entered in part of the address.
¤ Confirm with è.
L
Local Network
IP Address Type
Static
Dynamic
IP Address
192.168.2.2
M
Subnet Mask
255.255.255.0
M
Default Gateway
192.168.2.1
M
Preferred DNS server
M
192.168.2.1
L
IP Address
192 . 168 . 2 . 2
ç
è
1 2 3
4 5 6
7 8 9
0

Table of Contents