Gigaset SL910 - Setting Pauses; Switching Temporarily to Tone Dialling (Tone)

85
Connecting the base to the PABX
Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / settings-pabx.fm / 23.08.2011
Version 4.1, 21.11.2007
Setting pauses *
¤ Open the Settings menu and enter the number code for the service functions
(
¢ page 25).
¤ Enter the pause after line seizure: A F Afor 1 second,
A F B for 3 seconds or A F 3 for 7 seconds.
¤ Enter the pause after recall key: A B Afor 800 ms, A B Bfor 1600 ms or
AB 3for 3200 ms.
¤ Enter the dialling pause (pause after access code): A A Afor 1 second,
AABfor 2 seconds, A A 3 for 3 seconds or A A D for 6 seconds.
Inserting a dialling pause:
Press and hold ; for 2 seconds on the keypad. A P appears in the display.
Switching temporarily to tone dialling (Tone)
¤ After dialling the external number or after establishing the connection, briefly
touch :.