Gigaset SL910 - Connecting the Base to the PABX; Changing Dialling Mode and Setting Recall; Saving an Access Code (Outside Line Code)

84
Connecting the base to the PABX
Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / settings-pabx.fm / 23.08.2011
Version 4.1, 21.11.2007
Connecting the base to the PABX
To find out which settings are required for your PABX, please refer to the PABX user
guide.
You cannot send or receive SMS messages on PABXs that do not support Calling
Line Identification.
Recall and dialling mode
Changing the dialling mode
¤ In the Settings menu (¢ page 24), touch [ «Telephony].
¤ Touch ’ next to Dialling Mode. ¤ Select tone dialling (Tone)/pulse dialling pro-
cedure (Pulse) (
Ø = set value).
Setting recall
¤ In the Settings menu (¢ page 24), touch [ «Telephony].
¤ Touch ’ next to Recall. ¤ Select recall (Ø = set value).
Saving an access code (outside line code)
If you have to enter an access code before any external number on your PABX,
e.g., "0":
¤ In the Settings menu (¢ page 24), touch [ «Telephony].
¤ Touch the ’ next to Access Code. ¤ Enter the access code (max. 3-digit).
¤ Confirm with è.
¤ Touch the ’ next to Use. ¤ Select one of the following values (Ø = set value):
Never: Deactivate access code.
Calls from Call Lists: The access code should only be prefixed when dialling
from a list (SMS, calls, answering machine (SL910A)).
All Calls: The access code should be prefixed to every number.