Press button, clear the ambulatory blood pressure measure data, enter ambulatory blood pressure
mode, and start the ambulatory blood pressure monitoring. Refer to Figure 3.4.6 for the ABPM
interface.
Press
button, save ambulatory blood pressure measure data, enter ambulatory blood pressure
mode, and start the ambulatory blood pressure monitoring. Ambulatory blood pressure measurement
record includes previous data. Refer to Figure 3.4.6 for the ABPM interface.
Press
button, give up the choice, return the previous menu, and the ambulatory blood pressure
monitoring is not turned on.
2
．ABPM Working Interface
In ABPM working environment, backlight is only for 5 seconds, except the
, press any key to
wake the backlight, ABPM working interface is as shown:
To Next Page
Loading...
