GL-INET Opal User Manual

Page 109 | 153
Defaul port is 51830, if you want to use another port, find the Advanced option at
the lower left corner.
Due to device's performance, each Site to Site network can have up to 10
devices.
After you had chosen the devices, click Continue.
Then, it will test each device if it can be set as the Main Node of Site to Site.

GL-INET Opal Specifications

General

RAM	128 MB DDR2
WiFi	802.11b/g/n
USB Port	1 x USB 2.0
VPN Support	OpenVPN, WireGuard
Operating System	OpenWrt
Processor	QCA9531, 650MHz
Flash Storage	16 MB
Ethernet Ports	2 x 10/100 Mbps
Power Input	5V/2A