GL-INET Opal User Manual

Page 65 | 153
If you are using Windows 10, you also need to enable SMB 1.0.
• Windows 7
Go to Control panel -> Network and Internet -> Network and Sharing Center. Find
if your active network is Home network. If not, click it and change it to Home
network.
• Windows 10
Change your network to private by this tutorial.
Go to Control Panel -> Programs and Features -> Turn Windows features on or
off -> Find SMB 1.0/CIFS file sharing support, check all SMB1 related items, click
apply and restart your computer.

GL-INET Opal Specifications

General

RAM	128 MB DDR2
WiFi	802.11b/g/n
USB Port	1 x USB 2.0
VPN Support	OpenVPN, WireGuard
Operating System	OpenWrt
Processor	QCA9531, 650MHz
Flash Storage	16 MB
Ethernet Ports	2 x 10/100 Mbps
Power Input	5V/2A