GL-INET Opal User Manual

Page 87 | 153
nslookup xx5007c.glddns.com 8.8.8.8
The output above means the DDNS url has maped to a IP address.
4) HTTP Remote Access
This function requires a public network IP.
If your router is behind NAT, you may need to set up port forward in higher level
router. It use port 80.
Follow the steps above, to enable HTTP Remote Access.
HTTP is not encrypted, use at your own risk.

GL-INET Opal Specifications

General

RAM	128 MB DDR2
WiFi	802.11b/g/n
USB Port	1 x USB 2.0
VPN Support	OpenVPN, WireGuard
Operating System	OpenWrt
Processor	QCA9531, 650MHz
Flash Storage	16 MB
Ethernet Ports	2 x 10/100 Mbps
Power Input	5V/2A