EasyManua.ls Logo

GLEANER R66 - Component Identification and Serial Numbers

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
79032996 A Rev. 01-19
General Information
COMBINE IDENTIFICATION
The combine is identified by serial numbers which are
important for service and repair parts.
NOTE: References to left-hand and right-hand, used in
this manual, refer to position when seated in
operator seat and facing forward
Machine Serial Number
FIG. 45: The machine serial number plate is located on
the combine left-hand side frame at the rear corner.
Consecutive serial numbers starting with T6101 indicate
an R66.
Consecutive serial numbers starting with T7101 indicate
an R76.
Model Year
HU - 2009
Engine Serial Number
FIG. 46: The engine serial number is located on the
engine serial number plate (1). The serial number plate is
located on the left-hand rear of the engine block near the
starter.
Fuel Injection Pump Dataplate
FIG. 47: The fuel injection pump dataplate (1) is located
on the back of the injection pump.
FIG. 45
N606874
FIG. 46
M818414
1
FIG. 47
M818422
1

Related product manuals