GLEANER R66 - Right Hand Feeder House; Left Hand Feeder House

General Information
01-30 79032996 A Rev.
Right Hand Feeder House
FIG. 54: In front of front axle.
Pivot Drive Idler Hub (1) - (50 hours or weekly).
Remote fitting above front axle.
Feeder Housing Pivot Bushing (2) - (10 hours or daily).
Lubricate with the header sitting on the ground.
FIG. 55: Above front axle.
Front Feed Conveyor Drive Hub and Torque Limiter - Two
fittings (1) - (50 hours or weekly).
Left Hand Feeder House
FIG. 56: Front of feeder house.
Variable Speed header Drive sheaves (1) - (10 hours or
daily).
NOTE: There are no lube fittings on variable speed drive
Idler.
FIG. 57: Above axle.
Feeder Housing Pivot Bushing, remote, (1) - (10 hours or
daily).
Lubricate with header sitting on the ground.
FIG. 54
1
2
H710045
FIG. 55
1
h628038
FIG. 56
1
J904008
FIG. 57
1
H628005