4.0
ENG
GLT
Ω
L
IFT
O
PERATION
M
ANUAL
Page | 45
EXIT SEQUENCE (ROOF)
STEP
ACTION
1
Open the landing door and exit, unlocking the lock manually.
2
Climb down from the roof and stand on the landing.
3
Release the emergency stop (red button).
4
Close the landing door.
5
Turn the key on the “RESET” switch outside the bottom landing to the pit to reset the electrical panel functions
(audible buzzer sound).
6
The lift is back in service (floor call buttons are not lit).
IMPORTANT!
When exiting the pit and/or the car roof, the maintenance technician is advised to ensure that no
equipment or tools have been left behind that can impair smooth operation of the lift or even
cause accidents.
To Next Page
Loading...