Goblin 420 - Locking Element Tail Assembly; Tail Boom Assembly; M8 Carbon Block Assembly

Locking Element Tail Assembly .... x 2
Note:
Locking Element Tail
(H0535-S)
Locking Element
Tail Assembly
(H0535-S)
Double
Sided Tape
(HA033-S)
Bag 12, Box 3
Metric Hex
Nylon Nut M2.5
(HC200-S)
Double
Sided Tape
(HA033-S)
Yellow Tail Boom
(H0815-S)
Tail Boom Assembly
M8 Carbon Block Assembly
M8 Carbon Block
(H0534-S)
Metrix Nylon
Nut M8
(HC224-S)
M8 Carbon Block
Assembly
Double Sided Tape
(HA034-S)
Note:
You can use Super Glue for block
the nuts in correct position
Yellow Tail Boom
(H0815-S)
Note: We suggest to clean the sticking surface with sand paper.
Page 22
Chapter 13, Tail Assembly