- 5 x Uniballs M2
5H6.
- 5 x Uniball Spacers.
- 5 x Socket Head Cap Screws
M2x8mm.
- 5 x Socket Head Cap Screws
M2x6mm.
Uniball M2
5H6
[H0064-S]
- 5 x Uniballs M3x4
5H3.5.
Uniball M3x4
5H3
[H0065-S]
- 10 x Plastic Ball Link.
Plastic Ball Link
[H0066-S]
Bell Crank Lever
[H0234-S]
- 1 x Bell Crank level.
- 2 x Tail Pin.
- 2 x Flanged Bearing
2.5x
6x2.5mm.
- 1 x Spacer Arm
2.5x
4x6.3.
- 1 x Head Cap Screws M2.5x18.
- 1 x Uniball M3x
4 H5.
Finishing Washer M2.5
[H0255-S]
- 10 x Finishing Washer M2.5.
Tail Pitch Slider Link
[H0261-S]
- 2 x Tail Pitch Slider Link.
- 2 x Spacer
2x
3x3mm
.
- 2 x Socket Head Cap M2x6mm.
Plastic Ball Link M2
[H0403-S]
- 5 x Plastic Ball Link M2.
19T Motor Pulley
[H0501-19-S]
- 1 x 19T Motor Pulley Assembly.
- 1 x Set Screws M3x6mm.
- 1 x 20T Motor Pulley Assembly.
- 1 x Set Screws M3x6mm.
20T Motor Pulley
[H0501-20-S]
21T Motor Pulley
[H0501-21-S]
22T Motor Pulley
[H0501-22-S]
23T Motor Pulley
[H0501-23-S]
24T Motor Pulley
[H0501-24-S]
- 1 x 21T Motor Pulley Assembly.
- 1 x Set Screws M3x6mm.
- 1 x 22T Motor Pulley Assembly.
- 1 x Set Screws M3x6mm.
- 1 x 23T Motor Pulley Assembly.
- 1 x Set Screws M3x6mm.
- 1 x 24T Motor Pulley Assembly.
- 1 x Set Screws M3x6mm.
- 1 x 120T Main Pulley .
- 1 x Main Pulley Support.
- 2 x
Shims Ø8xØ14x0,2mm
.
- 5 x Head Cap Screws M2x5mm.
- 2 x Flanged Bearing Ø8xØ12x3,5mm.
- 1 x One Way Bearing Ø8xØ12x12mm.
Front Tail Pulley
[H0503-S]
20T Tail Pulley
[H0504-S]
- 1 x Front Tail Pulley Assembly.
- 1 x Head Cap Screws Shoulder
M2.5x15.
- 3 x Head Cap Screws M2x8mm.
- 1 x 20T Tail Pulley Assembly.
- 1 x Set Screws M3x6mm.
21T Tail Pulley
[H0505-S]
- 1 x 21T Tail Pulley Assembly.
- 1 x Set Screws M3x6mm.
- 1 x Swashplate Assembly.
- 1 x Rad Bearings
25x
32x4.
- 6 x Uniballs M2 Male.
- 1 x Uniballs M2 Female.
- 3 x Button Cap Screws M2x5.
- 3 x Swasher
2.2x
4x0.3.
- 2 x Head Cap Screws M2x8mm.
Main Shaft
[H0507-S]
- 1 x Main Shaft.
- 1 x Head Cap Screw M3x16mm.
- 1 x Metrix Nylon Nut M3.
Washplate Set
[H0506-S]
25T Motor Pulley
[H0501-25-S]
- 1 x 25T Motor Pulley Assembly.
- 1 x Set Screws M3x6mm.
120T Main Pulley
[H0502-S]
- 1 x Spindle Shaft.
- 2 x Button Cap Screw M4x6mm.
Spindle Shaft
[H0508-S]
Chapter 19, Spare Parts
Page 33
To Next Page
Loading...
