Goodwe SBP Series User Manual

User Manual V1.5-2021-01-21 04 OTHER
32
EMC
EN 61000-6-1, EN 61000-
6-2, EN 61000-6-3, EN
61000-6-4
EN 61000-4-16, EN
61000-4-18, EN 61000-
4-29
EN 61000-6-1, EN 61000-
6-2, EN 61000-6-3, EN
61000-6-4
EN 61000-4-16, EN
61000-4-18, EN 61000-
4-29
*1: The actual charge and discharge current also depends on the battery.
*2: Battery capacity could be not less than 100Ah where the back-up function is to be applied.
*3: 4600 for VDE0126-1-1&VDE-AR-N 4105 and CEI 0-21.
*4: For CEI 0-21 GW3600S-BP is 4050, GW5000S-BP is 5100; For VDE-AR-N4105 GW5000S-BP
is 4600.
*5: Can be reached only if battery capacity is enough, otherwise will shut down.
*6: AFDPF: Active Frequency Drift with Positive Feedback, AQDPF: Active Q Drift with Positive
Feedback.
*7: CAN communication is congured by default. If 485 communication is used, please replace
the corresponding communication line.
*8: Not all certications & standards listed, check the ocial website for details.
*9: 2000m for Australia.

Goodwe SBP Series Specifications

General

Brand	Goodwe
Model	SBP Series
Category	Inverter
Language	English