Gossen MetraWatt PROFITEST MBASE MTECH - Device Settings

GMC-I Messtechnik GmbH 7
4.6 Device Settings
SETUP
LED and LCD test menu
Rotary switch balancing menu
Brightness/contrast menu,
Software revision level,
calibration date
Display: date / time
Display: automatic shutdown
Display: automatic shutdown
of display illumination after 15 sec.
of the tester after 45 sec.
time, language, profiles
1
2
3
4
and battery test
0b
0a
0
1
3
0b
Return to main menu
0a
On-time Display Illumination
Brightness and Contrast Settings Time, On-Time and Default Settings
Menu Selection for Operating Parameters
LED Tests LCD and Acoustic Signal Tests
On-time Test Instrument
Cell test
Inverse cell test
Hide all pixels
Show all pixels
Acoustic signal test
Return to main menu
MAINS LED: test green
MAINS LED: test red
UL/RL LED: test red
RCD-FI LED: test red
Return to main menu
Increase brightness
Decrease brightness
Increase contrast
Decrease contrast
Set time 
Profiles for distributor
Default settings 
structures 
Language of
online instructions 
3a
3b
3c
3d
3e
Set date 
On-time
Display illumination/test instrument
Select inspector
(modification via ETC)