Gotop RigiScan Plus - Page 20

-20-
RIGISCAN
®
(User Guide)
To Import a New Patient From File:
1. Click the button to open the Patient Information window.
2. Click the button.
3. Use the dialog box to navigate to and select the le to import data from (usually a le with
extension “.dat”).
4. Click Open in the dialog box.
5. Click the button to save patient record.
6. Click the button to return to the RigiScan Plus Home Screen.
7. When prompted with the Conrm Close pop-up window, click OK.
To Edit an Existing Patient Record:
1. Click the Patient ID of the record you wish to edit, then click the button to open the Pa-
tient Information window.
or
Double-click the Patient ID of the record you wish to edit to open the Patient Information
window.
2. Modify elds in the General tab as necessary.
3. Click the button to save patient record.
4. In the Treatment History tab, use the Add New and Edit Selected buttons to create or modify
treatment records as done in To Add A New Patient (Manual Entry).
5. Use the Delete Selected button to delete existing treatment records.
6. Click the button to save changes made to treatment records.
7. In the RigiScan tab, use the Delete Selected Group button if you wish to remove any RigiScan
data from the patient record.
8. Click the button to save changes made to session records.
9. Click the button to return to the RigiScan Plus Home Screen.
10. When prompted with the Conrm Close pop-up window, click OK.