31
Repeat step 2 to install all four bungee
clamps.
Full Frame Assembly
Parts & Tools Needed:
Full Frame Assembly
Instructions
The bungee clamps hold the edges of the quilt up and provide additional tension to the quilt surface.
Take the following steps:
Step 10 - Installing the Bungee Clamps
Bungee Clamp (x4)
(Box 1: Inner Box)
1
2
Note: Your bungee clamps may have come
with bungee stops. These will not be
used.
Press down the bungee stop in the front rail
arm and thread the bungee cable through.
Release to tighten.
3
Bungee
Clamp (x4)
Bungee Stop (x4)
To Next Page
Loading...
