Grace Continuum II - Leveling the Frame

51
Crib Frame Assembly
Step 7 - Leveling the Frame
Parts & Tools Needed:
Instructions
Leveling the frame ensures the machine doesn’t pull away when stitching.
Open-End Wrench
14 & 17 mm
14
17
(Box 1: Inner Box)
Move the machine and bottom carriage to one corner of the frame, and release. If the machine
rolls away from the corner, use the 14 & 17 mm open-end wrench to adjust the leveling foot
at the bottom of the leg.
1
Leveling Foot