Grace Continuum II User Manual

49
Step 6 - Installing the Quilting Machine
Parts & Tools Needed:
Instructions
A channel lock should be installed on your quilting machine or top carriage before it is placed on the
frame. The channel locks assist with quilting straight lines.
T-Handle Allen
Wrench 4 mm
4 mm
SBHCS Screw
M6 x 20 mm (x1)
Channel Lock
Washer (x1)
Channel Lock (x1)
(Box 4)
(Box 4) (Box 4)
If using a top carriage and
home sewing machine,
please follow the instructions
in your top carriage manual
and then go to page 51.
Crib Frame Assembly
Remove the rear wheel on the right side of
your quilting machine or top carriage with
the 4 mm Allen wrench.
1
STOP HERE. Follow the instructions in
your machine manual to fully assemble the
machine. Continue with frame instructions
only after machine is completed.
3
Place the washer, channel lock and
machine wheel onto the M6 x 20 mm
SBHCS screw.
2
M6 x 20 mm
SBHCS
Washer
Channel Lock
Use the 4 mm Allen wrench to screw the
M6 x 20 mm SBHCS into the machine.
4

Grace Continuum II Specifications

General

Brand	Grace
Model	Continuum II
Category	Sewing Machine
Language	English