Grace Continuum II - Installing the Rails

53
Parts & Tools Needed:
Instructions
The rails hold and position the quilt on the frame.
Step 8 - Installing the Rails
On all non-ratchet rail sections: Use the
6 mm Allen wrench to loosen the M10 x
100 mm SBHCS screw.
1
Ratchet Rail Section (x2)
Non-ratchet Rail Section (x3)
(Box 3)
(Box 3)
Remove the non-ratchet rail end from the
metal tube.
2
Crib Frame Assembly
Handwheel Rail
(Box 3)
14
17
Allen Wrench 6 mm
(Box 1: Inner Box)
M10 x 100 mm
SBHCS
Non-ratchet Rail
End