61
Now do the same for the other side of the
rail.
On three halves of cut Velcro tape:
Fold the Velcro tape in half again and mark
out the center with your marker.
4
7
On all three rails: Lay a tape measure
at across the rail, aligning it with the
holes on the top. Find and mark the center
point.
5
8
Peel away a portion of the backing from
the center of the Velcro tape, and attach
the center of the tape to the center of the
rail.
6
9
Installing the Velcro Tape (Continued)
Peel o some of the backing from the end
of the tape. Use the holes on to rail to keep
the tape straight, and attach it to the end
of the rail.
Start from the center and carefully peel
away the backing of the tape, attening as
you go.
Crib Frame Assembly
To Next Page
Loading...
