Graco GM 5000 User Manual (English)

Other manuals for Graco GM 5000

Questions and Answers:

S
Shelley SantosSep 8, 2025
Why is the displacement pump output low on the upstroke of my Graco GM 5000?
- N
  Nicolas ReynoldsSep 8, 2025
  If the displacement pump output is low on the upstroke of your Graco Paint Sprayer, several factors could be responsible. First, check the pump inlet screen for any clogs and clean it if necessary. If the piston ball check is not seating correctly, it requires servicing. Additionally, inspect the piston packings for wear or damage and replace them if needed. Lastly, a worn or damaged sleeve gasket in the displacement pump could be the cause, and it should be replaced.
C
Crystal CooperSep 10, 2025
How to fix displacement pump low output on upstroke in Graco Paint Sprayer?
- M
  Mr. Roger Buchanan MDSep 10, 2025
  If your Graco Paint Sprayer's displacement pump output is low on the upstroke: * The pump inlet screen may be clogged; clean it. * The piston ball check may not be seating; service the piston ball check. * The piston packings may be worn or damaged; replace the packings. * The sleeve gasket in the displacement pump may be damaged; replace it.
K
Kristen HoustonSep 13, 2025
What to do if my Graco GM 5000 Paint Sprayer has low fluid delivery?
- C
  Christie RobertsSep 14, 2025
  If you're experiencing low fluid delivery with your Graco Paint Sprayer, consider the following: * The pump inlet screen may be clogged; clean it. * The pressure setting might be too low; increase the pressure. * The engine RPM could be too low; increase the throttle setting. * The outlet filter, tip filter, or tip may be dirty; clean them. * There might be a large pressure drop in the hose; use a larger diameter hose.