Air Cap Selection Guide
54 3A8099A
Air Cap Selection Guide
Air caps are versatile, and more than one air cap can
meet your finishing requirements. Select an air cap
based on coating properties, finishing requirements, and
operator preference.
To reduce the risk of injury, follow the Pressure
Relief Procedure, page 15, before removing or
installing a tip and/or air cap.
Part No. Color Description Optimal Use Recommendations
HVLP
Verification Kit
2GF042 PTFE Nickel General Finishing (GF) Atomizes tails at lower pressures. 2GF044
2WL042
Black Wood Lacquer (WL)
Spray wood finishing top coats and
lacquer.
2WL044
2WB042 Blue Waterborne (WB)
Break up the waterborne fluid stream for
even wet film build with waterborne
materials.
2WB044
2LV042 Silver Low Viscosity (LV)
Promote dispersion of low viscosity
materials.
2LV044
2HV042 Blue Grey High Viscosity (HV) Build wet film with high solids materials. 2HV044
2QD042 Green Quick Drying (QD)
Maintain transfer efficiency and
minimize air bubbles with quick drying
materials.
2QD044
2TC042 PTFE Nickel Top Coat (TC) Spray wood finishing top coats 2TC044
2AL042 Black Airless (AL) Airless spray application. ---
To Next Page
Loading...
