Operation
Setup Mode
The ADM will start in the Run screens at the Home screen. From the Run screens,press to access the
Setup screens. The system defaults with no password, entered as 0000. Enter the current password then
press
.Press to navigate through the Setup Mode screens.
Set Password
Set a password to allow Setup screen access, see Advanced Screen 1 — General, page 50. Enter any
number from 0001 to 9999. To remove the password, enter the current password in the Advanced Screen –
General screen and change the password to 0000.
From the Setup screens, press to return to the Run screens.
332636C 49
To Next Page
Loading...
