Operation
Advanced Setup Screens
Advanced setup screens enable users to set units, adjust values, set formats, and view software information
for each comp
onent. Press
to scroll through the Advanced setup screens, Once in the desired
Advanced setup screen, press
to access the fields and make changes. When changes are complete press
to exit edit mode.
Note
Users must be out of edit mode to scroll
through the Advanced setup screens.
Advanced Screen 1 — General
Use this screen to set the language, date format,
current date, time, setup screens password (0000 –
for none) or (0001 to 9999), and screen saver delay.
Advanced Screen 2 — Units
Use this screen to set the temperature units, pressure
units, volume units, and cycle units (pump cycles or
volume).
Advanced Screen 3 — USB
Use this screen to disable USB downloads/uploads,
disable USB log errors, enter the maximum number
of days to download data, and how frequently USB
logs are recorded. See USB Data, page 77.
Advanced Screen 4— Software
This screen displays the software part number and
software version for the Advanced Display Module,
USB Configuration, Motor Control Module, and
Temperature Control Modules.
50 332636C
To Next Page
Loading...
Need help?
General
