Graco Reactor 2 Series - Register and Activate the Graco Insite

Operation
Register and Activate the Graco Insite
1. Go to www.GracoInSite.com, click on “InSite
Login, then follow the instructions on the screen.
2. Find and record the 15 digit serial number from
the cellular box below.
Serial No.
Verify Module Status
To check the status of the cellular module, locate the status LEDs on the module then refer to the following
chart.
LED Status Description
Green flashing Finding GPS location
Green solid GPS location identified
Orange flashing Cellular connection in process
Orange solid Cellular connection established
Green and orange off Reactor power is OFF
48 332636C