Gram BAKER GA 950 - Placement of Multiple Units Next to each Other

765041938 Rev. 002 9

Placement of multiple units next to each other
Depending upon the temperature and humidity at the installation location as well as the
correct values being set, water contained in the surrounding air may condense on the surface
of a refrigerator (condensation formation) due to the design.
If multiple refrigerators or freezers are placed next to each other, then this condensation
effect is stronger, plus a smaller amount of air would then circulate between the units.
Hence, the minimum distance between the units must be 40 mm.
This space must not be closed off at its top or bottom, however due to aesthetical
considerations it may be covered in the front by, for example, a stainless steel panel. In order
to be able to clean this space, the panel must be detachable.
If it is not possible to establish free air circulation at the bottom via, for example, installation
on a pedestal, then the space must not be fully sealed at the front.
Min. 40 mm