DP760 User Manual
Version 1.0.3.34
Configures user level password.
Case sensitive and max length is 30 characters.
Configures the new user password again to confirm.
Configures admin level password.
Case sensitive and max. length is 30 characters.
Configures the new admin password again to confirm.
If white list exists, then only these IP addresses are allowed for
Web and SSH access.
If black list exists and white list is empty, then only these IP
addresses are not allowed for Web and SSH access.
Customizes HTTP port used to access repeater Web GUI. Default is 80.
Customizes HTTPS port used to access repeater Web GUI. Default is 443.
Determines the protocol to be used for the Web GUI access. Default is HTTP.
Disables SSH access. Default is No.
Customizes SSH access port. Default is 22.
Defines URL or IP address of the NTP (Network Time Protocol) server. Used by
the repeater to synchronize the date and time. A list of public NTP servers can be
found at http://www.ntp.org .
Contacts NTP server at specified period of time (in minutes) to obtain the date
and time. Default is 60 minutes.
Allow DHCP Option
42 to NTP Server
Obtains NTP server address from a DHCP server using DHCP Option 42; it will
override configured NTP Server. If set to No, the repeater will use configured NTP
server to synchronize time and date even if a NTP server is provided by DHCP
server. Default is Yes.
Selects time zone to define date/time on the repeater station.
Allows users to define their own time zone.
https://arttel.ru/
https://arttel.ru/shop/dect-ip-telefony/grandstream-dp760
To Next Page
Loading...
Need help?
General