Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it will
override selected time zone. If set to No, DP760 DECT repeater will use selected
time zone even if provided by DHCP server. Default is Yes.
Sets IP address or URL of system log server. The server collects system log
information from the repeater station.
Selects log level; the level is one of DEBUG, INFO, WARNING, ERROR (default is
NONE). Syslog messages are sent based on the following events:
1. product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. inbound and outbound calls (INFO level)
6. registration status change (INFO level)
7. negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
Syslog uses USER facility. In addition to standard Syslog payload, it contains the
following components: GS_LOG: [device MAC address] [error code] error
message.
Example: May 19 02:40:38 192.168.1.14 GS_LOG:[00:0b:82:00:a1:be][000]
Ethernet link is up
Displays packet capture status. When user starts to capture trace file, it will show
RUNNING status, otherwise, it will show STOPPED.
Specifies the type of reset to perform via the Web GUI button.
- There are 2 reset type for Web GUI button:
1. Full Factory Reset: Reset all the settings.
To Next Page
Loading...
Need help?
General