pressing “OK” button.
• Sounds
o Ring Tone
Configures different ring tones for incoming call.
o Ring Volume
Adjusts ring volume by pressing left/right arrow key.
• Audio
o Headset TX gain
Configures the transmission gain of the headset.
o Headset RX gain
Configures the receiving gain of the headset.
• Appearance
o Active LCD Brightness
Adjusts active LCD brightness by pressing left/right arrow key
o Idle LCD Brightness
Adjusts idle LCD brightness by pressing left/right arrow key
o Active LCD Timeout
Adjusts the minute of active backlight timeout.
o Screensaver
Enables/Disables Screensaver
o Screensaver Timeout
Configures the minutes of idle before the screensaver activates.
Valid range is 3 to 60.
• MPK LCD Settings (Available on GRP2614 only)
o MPK LCD Display Order
Choose MPK LCD Display Order whether to be Sequential or
Alternating
o Display Contact on MPK LCD
Enable / Disable Display Contact on MPK Order
• Language and Input
o Display Language
Selects the language to be displayed on the phone’s LCD. Users could
select Automatic for local language based on IP location if available.
By default, it is Auto.
o Default Input Selection
Selects the Input mode from Multi-Tap and Shiftable. By default, it is
To Next Page
Loading...
