Configuring Eventlist BLF
Grandstream GRP261X Carrier-Grade IP Phones support both Grandstream UCM Busy Lamp Filed and
Event List BLF features and allows end users, such as attendant, to monitor the call status of users in the
list. GRP26XX supports this feature by sending out the subscription request to the UCM and changing the
indicator status of the Line keys, MPKs, or virtual MPKs that associated with the monitored users.
Additionally, the phone is also able to display the original caller’s call ID and to pick up the calls to the
monitored extensions by using a pre-defined feature code called BLF- Call-pickup Prefix.
For more details on Eventlist BLF configuration guide, please refer to:
http://www.grandstream.com/sites/default/files/Resources/GRP261X_Eventlist_BLF_Guide.pdf
Screenshots
Users can take screenshots of the GRP261X Screen, by pressing and holding the “HOLD” key and then
the “MENU” key, the output will be shown on the phone’s Web GUI under “Status → System Info” as shown
in the figure below:
Figure 59: Screenshots
• Users can “Download” then view the screenshot.
• Users can clear the available Screenshots by pressing “Start”
Diagnosis
Users could access factory functions menu in order to diagnosis the phone’s hardware/software. To do so
please access to LCD menu under System → Factory Functions or use the shortcut by pressing the
“HOLD” Key and the “Up-arrow” key at the same time.
To Next Page
Loading...
Need help?
General
