o Certificate Verification
This is used to validate certificate chain for the server’s
certificate.
• UCM Detect
Detect/connect UCM server to process auto-provision. Manually input the IP and
port of the UCM server phone wants to bind with; Or select from the available
UCM server in network.
• Authentication
o Admin Password
This is used to change the admin password for Web UI access.
o End User Password
This is used to change end user password for Web UI access.
o Settings
Turns on/off Test Password Strength feature. This will allow only
passwords with some constraints to ensure better security.
• Operations
o Factory Reset
It is used to restore the phone to factory default settings.
o Ping and Traceroute
It is used to show the route taken by packets across to an URL.
o Alternative firmware
It is used to show current and alternative firmware versions available
on the phone. Users can “rollback” to alternative firmware from this
menu.
To Next Page
Loading...
