Grandstream Networks GRP2636 User Manual

● Local Group
● LDAP Directory
Contacts sub menu is for Local Phonebook, Local Group, LDAP Directory and Broadsoft
Phonebooks. User could configure phonebooks/groups/LDAP options here, download phonebook
XML to the phone and search phonebook/LDAP directory.
Messages
Message sub menu include the following options:
– Instant Message:Displays received instant messages
– Voice Mails:Displays voicemail message information in the format below: new messages/all
messages (urgent messages/all urgent messages).
Preference
Preference sub menu includes the following options:
– Do Not Disturb: Enables/disables Do Not Disturb on the phone.
– Keypad Lock:Turns on/off keypad lock feature and configures keypad lock password. The
default keypad lock password is null. If user enabled Star Key lock without configuring password,
user can unlock keypad by holding * key 4 seconds and pressing “OK” button.
– Sounds:
● Ring Tone:Configures different ring tones for incoming call.
● Ring Volume: Adjusts ring volume by pressing left/right arrow key
– Appearance:
● Active LCD Brightness: Adjusts active LCD brightness by pressing left/right arrow key.
● Idle LCD Brightness: Adjusts idle LCD brightness by pressing left/right arrow key.
● Active LCD Timeout: Adjusts the minute of active backlight timeout.
● Screensaver: Enables/Disables Screensaver.
● Screensaver Timeout: Configures the minutesof idle before the screensaver activates.Valid
range is 3 to 60.
– MPK LCD Settings (Available on GRP2614/GRP2616 only):
● MPK LCD Display Order:Choose MPK LCD Display Order whether to be Sequential or
Alternating
● Display Contact on MPK LCD: Enable / Disable Display Contact on MPK Order
– Language and Input:
● Display Language:Selects the language to be displayed on the phone’s LCD. Users could select
Automatic for local language based on IP location if available. By default, it is Auto.
● Default Input Selection:Selects the Input mode from Multi-Tap and Shiftable. By default, it is
Multi-Tap.—Multi-Tap: User may tap the same key multiple times to switch to the desired
character.—Shiftable: After pressing the number button, user will see the IDs of the characters
that matching to the button. User can select the desired character by entering the
corresponding ID on keypad.
– Date Time:
● Allow DHCP Option 42 to override NTP server
● Allow DHCP Option 2 to override NTP server
● Time Settings
It is used to configure date and time on the phone.
– Search Mode:
Specifies the phonebook search mode to QuickMatch or ExactMatch. By default, it is QuickMatch.
Phone
Phone sub menu includes the following options:
● SIP:Configures SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID, SIP Password, SIP
Transport and Audio information to register SIP account on the phone.
● Call Features:Configures call forward features for Forward All, Forward Busy, Forward No
Answer and No Answer Timeout.
System System sub menu includes the following options:
– Network:
● Internet Protocol :Selects Prefer IPv4 / Prefer IPv6 / IPv4 only or IPv6 only. The default setting
is “Prefer IPv4”.
● IP Setting:Selects IP mode (DHCP/Static IP/PPPoE); Configures PPPoE account ID and
password; Configures static IP address, Netmask, Gateway, DNS Server 1 and DNS Server 2.

Grandstream Networks GRP2636 Specifications

General

Brand	Grandstream Networks
Model	GRP2636
Category	IP Phone
Language	English