Figure 52 GXV3275 Disconnect Party from Conference
END CONFERENCE
To end the conference, the host could tap on to disconnect all the parties from the
conference. If the remote party hangs up the call itself, it will be disconnected from the conference
but other parties on GXV3275 will stay in the existed conference.
HOLD & RESUME CONFERENCE
During the conference, the host could tap on the Hold button to hold the calls with all parties. If the
remote parties press the Hold button can only hold his own call to the conference.
GXV3275 also supports automatic conference. When GXV3275 have 1 or more active calls, users
could add all parties to conference. Go to the Web page and Tap on Advanced Settings - > Call
Features> Auto Conference, check "Yes" and save the change. When GXV3275 have two or more
roads on phone, just tap on More—Conf to connect all the current lines to the conference.
Note:
For 4-way conference and 6-way conference, PCMA and PCMU are the
supported codec in current firmware version.