Grandstream Networks, Inc. GXV3615 User Manual Page 27 of 37
Firmware Version 1.0.4.38 Last Updated: 03/2013
Maintenance Page
This page allows user to maintain the camera:
Figure 11: Maintenance Page
• Restart: When clicked, the camera will reboot or restart
• Restore: When clicked, the camera will be reset to factory default, wiping out all
the configurations (except IP address)
Firmware Upgrade and Provisioning:
• Upgrade via: Upgrade firmware via TFTP, HTTP or HTTPS
• Firmware Server Path: Server path holding the firmware
• Config Server Path: Server path holding the configuration file (auto provisioning)
• XML ConfigFile Password: Password for encrypt the XML based configuration file
• Automatic Upgrade Interval (Minutes): Time interval for automatic upgrade, default 10080
• Automatic Upgrade: Checked to enable automatic firmware upgrade and provisioning.
NOTE:
Only XML based provisioning is supported by GXV3615 and GS surveillance products.