Grandstream Networks GXV3615 - FTP Upload Configuration; FTP Server Configuration for Uploads

Grandstream Networks, Inc. GXV3615 User Manual Page 29 of 37
Firmware Version 1.0.4.38 Last Updated: 03/2013
FTP Settings Page (Upload Alarm)
This page allows user to configure FTP parameters to upload the alarm or video recording::
Figure 14: FTP Setting Page
• Enable FTP: When checked, built-in FTP client is enabled.
• FTP Server: IP or Domain name of FTP site or server
• FTP Server Port: TCP port for FTP server, default port number 21
• User Name: FTP server User ID
• Password: FTP server user password
• Path: Path in FTP server where upload files stored, blank means default folder.
NOTE:
 Click “Save” to save the FTP configuration information.
 Click “Test” after configuration, if setting is correct, a test FTP operation will be performed and
“Test successful!” yellow bar will display if the operation is successful.