Grandstream Networks GXV3615 User Manual

Grandstream Networks, Inc. GXV3615 User Manual Page 36 of 37
Firmware Version 1.0.4.38 Last Updated: 03/2013
RESTORE FACTORY DEFAULT SETTING
WARNING!
Restoring the Factory Default Setting will DELETE all configuration information of the camera. Please
BACKUP or PRINT out all the settings before approach to following steps. Grandstream will not take any
responsibility if you lose all the parameters of setting or cannot connect to your VoIP service provider.
FACTORY RESET
There are two (2) methods to reset your unit:
Reset Button
Reset default factory settings following these four (4) steps:
1. Unplug the Ethernet cable.
2. Locate a needle-sized RESET hole on the back panel of the camera above the power jack.
3. Insert a pin in this hole, press and hold for about 30 seconds till reboot
4. Take out the pin. All settings are now restored back to factory default settings.

Grandstream Networks GXV3615 Specifications

General

Brand	Grandstream Networks
Model	GXV3615
Category	IP Camera
Language	English